The Ford Model T was the first automobile mass produced on moving assembly lines with completely interchangeable parts, marketed to the middle class. This car had 2 forward gears, a 20 horsepower engine and no driver doors.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal

The Model T was Ford's first automobile mass-produced on moving assembly lines with completely interchangeable parts, marketed to the middle class.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal

The Ford Model A was the Ford Motor Company's second market success after its predecessor, the Model T. First produced on October 20, 1927, but not introduced until December 2, it replaced the venerable Model T, which had been produced for 18 years.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal

The Model 18 coupe with its more powerful V8 engine was more popular than the four-cylinder Model B coupe. In the 1940s, the '32 Ford became an ideal motor vehicle that has been easy to modified to give it extra power and speed, being plentiful and cheap enough for young men to buy, and available with a stylish V8 engine. Rodders would strip weight off this readily available car and "hop up" or customize the engine.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal

The 1937 Ford featured a more rounded look with fine horizontal bars in the convex front and hood-side grilles. The front grille was V-shaped, rather than following the fenders into a pentagon shape, as on the 1936 model. Faired-in headlights were a major modernization found on both the Standard and DeLuxe trim versions, though much of the rest of the design was shared between Ford's two lines. A larger water pump was used to help aid in cooling.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal

Monster Truck is a specialized truck with a larger suspension and oversized tires, usually for competition and recreational uses.
3 sheets of metal

Ford Trimotor was the world’s first luxury airliner when it took to the skies in the late 1920s. Nicknamed the “Tin Goose”, it featured an aluminum corrugated sheet-metal body and wings and was powered by three 420-hp Pratt & Whitney Wasp radial engines. Due to its rugged dependability Admiral Byrd chose it for his attempt to be the first person to fly over the South Pole, which he did on November 28, 1929.
3 sheets of metal